CNC Drill EDM
Salient Features
- Ball screw for X, Y axis
- X & Y axis move to coordinate automatically as per programs
- L.M. Guide for Z axis
- Adjustable high pressure compact water pump with filtration
- Spindle motor drive greatly improve the machine efficiency
- Spindle run smoothly low noise
- Processing parameters of the digital display, simple & intuitive
- parameter changing is allowable during operation
- Job material steel/copper/brass/aluminium/carbide
- Motorized work head movement
- Electrode dressing facility
- Job holding fixture & clamps
- Top water is used as dielectric fluid
- Precise granite table
- Compact footprint
- Brass & copper electrodes can be used
- Machine lamp
- Automatic lubrication pump
- Windows based software
Standard Accessories
- Levelling Pads : 4 Nos
- Clamping Kit : 1 Set
- Tool Kit : 1 Set
- Water Can : 2 Nos
- Guides : 3 Nos
- Electrode : 30 Nos
- Rubber Seal : 5 Nos
Application Accessories
- Start hole for wire cut EDM
- Gas discharge
- Ejector Pins
- Cooling pins
- Air vent for forging die
- Jet hole
- Filter hole
- Remove broken tap
Technical Specification
| Technical Specification | Unit | CNC-4030 | CNC-5040 |
|---|---|---|---|
| Dimension of working table ( X x Y ) | mm | 400 x 600 | 440 x 630 |
| Travel of working table ( X x Y ) | mm | 300 x 400 | 400 x 500 |
| Z axis travel ( Z + W ) | mm | 350 + 300 | 350 + 300 |
| Distance from quill to table | mm | 50 - 350 | 200 - 500 |
| Max. machining current | amp | 30 | 30 |
| Drilling range | mm | 0.20 - 3.00 | |
| Max. electrode length | mm | 500 | 500 |
| Max. workpiece weight | kg | 200 | 300 |
| Max. machining speed | mm/min | 30 - 60 | 30 - 60 |
| Max. power consumption | kVA | 3.5 | 3.5 |
| Drive system for X, Y, Z axis | Servo Motor | ||
| Input power supply | V | 3 Phase, 415V , 50Hz | |
| Machine dimension | mm | 1200 x 1000 x 2170 | 1300 x 1075 x 2320 |
| Machine weight | kg | 800 | 900 |